Solvey Galden Perfluoropolyether Fluorinated Fluids HT135 HT-High Boilers 5kg Bottle PFPE

High Boiler Grades
Solvey Galden High Boilers (HBs) is the family of heat transfer synthetic fluids engineered for high temperature applications which feature:

• The highest boiling points among fluorinated heat transfer fluids
• Very low vapor pressure and evaporation tendency
• Outstanding non-flammability
• Excellent chemical inertness
• Safety (FM approved 6930 standard)

Solvey Galden HBs are the best candidates for use at temperatures above 150° C to 270° C without pressure build-up and absolutely no fire hazard. Among the advantages of a sound safety profile for high temperature applications is a positive impact on the Cost of Ownership.

Galden® HT - HIGH Boilers

Property	Units	Galden® HT230	Galden® HT270
Normal Boiling point	°C	230	270
Density @ 25°C	g/cm3	1.82	1.85
Kinematic viscosity @ 25°C	cSt	4.4	11.7
Vapor pressure @ 25°C	torr	0.025	3*10-3
Specific heat @ 25°C	cal/g°C	0.23	0.23
Thermal conductivity @ 25°C	W/m°C	0.65	0.65
Heat of vaporization @ boiling point	cal/g	16	15
Dielectric strength @ 25°C	KV (2.54mm gap)	40	40
Dissipation factor @ 25°C (1 kHz)		2*10-4	2*10-4
Dielectric constant @ 25°C (1 kHz)		1.94	1.94
Volume resistivity	O.cm	5*1015	5*1015
Solubility of water	ppm (wt)	14	14
Solubility of air	cm3gas/ 100 cm3liquid	26	26
Coefficient of expansion	cm3/cm3°C	0.0011	0.0011
Average molecular weight		1,020	1,550
Appearance		Clear and odorless	Clear and odorless

Galden® HT - Low Boilers

Property	Units	Galden® HT55	Galden® HT70	Galden® HT80	Galden® HT110
Boiling point	°C	55	70	80	110
Pour point	°C	<-115	-115	<-110	-100
Density @ 25°C	g/cm3	1.65	1.68	1.69	1.71
Kinematic viscosity @ 25°C	cSt	0.45	0.50	0.57	0.77
Kinematic viscosity @ 0°C	cSt	0.64	0.75	0.83	1.21
Kinematic viscosity @ -20°C	cSt	0.91	1.09	1.22	1.94
Kinematic viscosity @ -40°C	cSt	1.40	1.79	2.00	3.74
Surface tension @ 25°C	dynes/cm	16	14	16	16
Vapor pressure @ 25°C	torr	225	141	105	17
Specific heat @ 25°C	cal/g°C	0.23	0.23	0.23	0.23
Thermal conductivity @ 25°C	W/m°C	0.065	0.065	0.065	0.065
Heat of vaporization @ boiling point	cal/g	22	17	17	17
Dielectric strength @ 25°C	KV (2.54mm gap)	40	40	40	40
Dissipation factor @ 25°C (1 kHz)		2*10-4	2*10-4	2*10-4	2*10-4
Dielectric constant @ 25°C (1 kHz)		1.86	1.88	1.89	1.92
Volume resistivity	O.cm	5*1015	5*1015	5*1015	5*1015
Solubility of water	ppm (wt)	14	14	14	14
Solubility of air	cm3gas/ 100 cm3liquid	26	26	26	26
Refractive index @ 25°C		1.280	1.280	1.280	1.280
Coefficient of expansion	cm3/cm3°C	0.0011	0.0011	0.0011	0.0011
Average molecular weight		340	410	430	580

Solvay Galden PFPE

Galden PFPE HT is a line of heat transfer fluids with boiling points ranging from 55°C to 270°C designed for vapour phase soldering process. We recommend using Galden fluids on our IBL vapor phase systems for standard applications.
Their excellent dielectric properties, high chemical stability combined with their capacity to operate at very low as well as elevated temperatures make them the best heat transfer fluids for the aggressive conditions used for various high-tech applications in the semiconductor and electronic industry.

Galden Features:

• Wide choice of grades with different boiling point
• Narrow molecular weight distribution
• No flash or fire points
• No auto ignition point
• No explosion hazards
• Excellent thermal and chemical stability
• Good compatibility with materials
• Low heat of vaporization
• Vapor density greater than air
• Very gentle to components, as no overheating is possible
• Very simple and inexpensive construction of the soldering system - especially for the prototype area
• Due to the high heat transfer much more rapid soldering process
• Soldering with absence of air
• The high molecular weight of the used PFPEs there is practically no drag-out and so costs are very low
• More energy efficient than other soldering methods

Perfluoropolyether Fluorinated Fluids

Property	HT55	HT70	HT90	HT110	HT135	HT170	HT200	HT230	HT270
Avg Molecular Weight	340	410	460	580	610	760	870	1020	1550
Normal Boiling Point(℃)	55	70	90	110	135	170	200	230	270
Pour Point (℃)	<-110	<-110	<-110	<-110	<-100	<-97	<-85	<-77	<-66
Open Cup Flashpoint	none	none	none	none	none	none	none	none	none
Flannability Range (vol%)	none	none	none	none	none	none	none	none	none
Surface Tension (dynes/cm)	10	14	16	16	17	18	19	19	20
Vapor Press (mm/Hg)@25℃	225	141	48	17	8	<1	<1	<1	<0.01
Density (g/ml)	1.65	1.68	1.69	1.71	1.72	1.77	1.79	1.82	1.85
Viscosity (cSt)@25℃	0.45	0.5	0.75	0.77	1	1.8	2.4	4.4	14
Heat of Vaporization (cal/g) @bp	22	17	17	17	16	16	15	15	15
Atmospheric Lifetime (yrs)	>800	>800	>800	>800	>800	>800	>800	>800	>800

PFPE heat transfer fluid Operating temperature range

Our advantage Products:

【Honeywell】Module DCS / PLC
【Emerson / Delta V】Module
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【GE/Fanuc】IC69 Series PLC
【Mitsubishi】Servo Drive / Servo Motor
【Solvey Galden】Heat Transfer Fluid
(Modicon,SMC,SICK,NORGREN,Siemens etc.)



Company Introduction

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................