| IC200MDD847 | IC200MDD848 | IC200MDD849 |
| Product Name | VersaMax Discrete Mixed Modules
240 VAC Input 8 points/Output Relay
2 .0A Isolated 8 points | VersaMax Discrete Mixed Modules
120 VAC Input 8 points/Output
120 VAC 0 .5A Isolated 8 points | VersaMax Discrete Mixed Modules
120 VAC Input Isolated 8 points/Output
Relay 2 .0 A Isolated 8 points |
| Lifecycle Status | Active | Active | Active |
| Input Voltage | 240 VAC | 120 VAC | 0-132 VAC (47 to 63 Hz), 120 VAC nominal |
| Output Voltage | 0-125 VDC, 5/24/125 VDC nominal;
0-265 VAC (47-63 Hz),
120/240 VAC nominal | 120 VAC | 0-125 VDC, 5/24/125 VDC nominal;
0-265 VAC (47-63 Hz),
120/240 VAC nominal |
| Number of Points | 8 in/8 out | 8 in/8 out | 8 in/8 out |
| Channel to Channel Isolation | Yes, outputs | Yes | Yes |
| Load Current per Point | 2 .0 A for 5-265 VAC, 2 .0 A for 5-30 VDC,
0 .2 A for 31-125 VDC | 10 mA min, 0 .5 A max ., 5 A for 1 cycle
(20 ms) max . inrush | 2 .0 A |
Input and Output Response
Time- On/Off(ms) | 1 AC cycle minimum and 2 AC cycle
(Hz dependent) maximum and 10 .0 OFF | 1 cycle/2 cycle and
<1/2 cycle/<1/2 cycle | 1 cycle/2 cycle and
10/10 |
| Protection | No internal fuses or snubbers | Snubber and MOVs (each output) | No internal fuses or snubbers |
| On State Current | 4 mA minimum | 5 mA minimum | 5 mA minimum |
| Off State Current | 1 .5 mA maximum | 2 .5 mA maximum | 2 .5 mA maximum |
| External Power Supply | 0-125 VDC, 5/24/125 VDC nominal;
0-265 VAC (47-63 Hz), 120/240 VAC nominal | 0-125 VDC, 5/24/125 VDC nominal;
0-265 VAC (47-63 Hz), 120/240 VAC nominal | N/A |
| Input Impedance | 38 .5 kOhms (reactive) at 60 Hz, typical;
46 .3 kOhms (reactive) at 50 Hz, typical | 8 .6 kOhms (reactive) at 60 Hz, typical;
10 .32 kOhms (reactive) at 50 Hz, typical | 8 .6 kOhms (reactive) at 60 Hz, typical;
10 .32 kOhms (reactive) at 50 Hz, typical |
| Load Current | 10 mA per point minimum
2 .0 Amps for 5 to 265 VAC maximum (resistive)
2 .0 Amps for 5 to 30 VDC maximum (resistive)
0 .2 Amp for 31 to 125 VDC maximum (resistive) | 10 mA minimum per point,
0 .5 A maximum per point, 5 .0 A for
one cycle (20 ms) maximum inrush | 10 mA per point minimum;
2 .0 A for 5-265 VAC maximum (resistive);
2 .0 A for 5-30 VDC maximum (resistive);
0 .2 A for 31-125 VDC maximum (resistive) |
5V Backplane Current
Consumption (mA) | 300 maximum | 125 maximum | 300 maximum |
| LED Indicators | One LED per point shows individual point
on/off state (logic side); OK LED indicates
backplane power is present | One LED per point shows individual point
on/off state (logic side); OK LED indicates
backplane power is present | One LED per point shows individual point
on/off state (logic side); OK LED indicates
backplane power is present |
| Dimensions (W x H x D) | 110 mm (4 .3 in) x 66 .8 mm (2 .63 in) x
50 mm (1 .956 in), not including the
height of the carrier or the
mating connectors | 110 mm (4 .3 in) x 66 .8 mm (2 .63 in) x
50 mm (1 .956 in), not including the
height of the carrier or the
mating connectors | 110 mm (4 .3 in) x 66 .8 mm (2 .63 in) x
50 mm (1 .956 in), not including the
height of the carrier or the
mating connectors |
