3000 r/min HG-KR13J Industrial Servo Motor 0.1 kW.0.05
kW.Mitsubishi SERVO MOTOR 100W 3K RPM 200VAC
Product Details
• Shipping Weight (KG) : 3.0
• Brand Name: Mitsubishi
• Model Number: HG- KR13J
• Type: Servo Motor
• Certification: CCC,CE,ROHS,UL
• AC Voltage: 208-230 / 240 V
• Place of Origin: Japan
• Mistubishi servo motor: HG- KR13J
Product Name: Rotary servo motor.
Model: HG-KR13BJ.
Inertia/capacity: Low Mitsubishi HG-KR13J inertia, small capacity.
Rated output: 0.1 kW.
Rated speed: 3000 r/min.
Maximum speed: 6000 r/min.
Oil Mitsubishi HG-KR13J seal: Installed.
Electromagnetic brake: Installed.
Product Name: Rotary Mitsubishi HG-KR13J servo motor.
Model: HG-KR053.
Inertia/capacity: Low inertia, small capacity.
Rated output: 0.05 kW.
Rated speed: 3000 r/min.
Maximum speed: 6000 r/min.
Oil seal: None.
Product Name: Rotary servo motor.
Model: HG-KR053BJ.
Inertia/capacity: Low inertia, small capacity.
Rated output: 0.05 kW.
Rated speed: 3000 r/min.
Maximum speed: 6000 r/min.
Oil seal: Installed.
Electromagnetic brake: Installed.
Product Name: Rotary servo motor.
Model: HG-KR43J.
Inertia/capacity: Low inertia, small capacity.
Rated output: 0.4 kW.
Rated speed: 3000 r/min. Maximum HG-KR13J speed: 6000 r/min.
Oil seal: Installed.
MITSUBISHI HG-KR13J Manual And Instructions
HG-KR13J datasheetPDF datasheet
MITSUBISHI HG-KR13J Product information and technical parameters:
Brand: MITSUBISHI
Name: Low inertia small capacity servo motor
Model: HG-KR13J
Servo motor series: low inertia, small capacity.
Rated output: 0.1kw.
Rated speed: 3000r/min.
Electromagnetic brake: No.
Oil seal: incidental (Note 1, note 2, note 3).
Power supply: 200V.
Note 1 through HG-KR and HG-MR series 0.1kW and HG-SR series can be
supported.
Note 2 with the speed reducer case, do not configure the oil seal.
Note 3 with oil seal HG-KR, HG-MR series servo motor''s appearance
size standard is different.
The rated speed is 3000r/min, the maximum speed is 6000r/min.
The maximum torque of 350% of the rated torque, high torque in the
field of high rotation, only to support the HG-KR series products.
Built in absolute position encoder with high resolution.
Standard high resolution absolute position encoder (4194304p/rev
(22bit)).
To achieve a higher accuracy of the positioning function.
Improve the environmental performance of HG-KR, HG-MR, HG-RR, HG-UR
series of products using IP65.
Drive unit 200VAC/400VAC level.
MITSUBISHI motor general AC servo amplifier MELSERVO-J3 series.
Need conversion unit MR-J3-CR55K) supporting the use of.
Rated output: 30kw.
Interface type: SSCNET type III fiber communication.
Power specification: three phase AC400V.
High speed serial communication between the SSCNET and the servo
amplifier by using the fastest up to 0 MITSUBISHI HG-KR13J. 44ms
communication cycle,
A fully synchronous control system can be constructed HG-KR13J
It is only necessary to insert the special optical fiber into the
joint to form SSCNET III network, which greatly reduces the wiring
work and reduces the possibility of false wiring.
Due to the adoption of the optical fiber communication, the anti
noise ability can be greatly improved and the long distance wiring
of 50 meters (maximum 800 meters x 16 axes) can be realized
MITSUBISHI HG-KR13J.
A servo amplifier to meet the full closed loop control function
MR-J3-B-RJ006.
Suitable for mechanical servo optimization and adjustment!
More advanced optimization adjustment function and control function
to maximize mechanical properties. Servo motor series: low inertia,
medium / high power MITSUBISHI HG-KR13J.
Rated output: 6.0kw.
Rated speed: 1000r/min.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis).
Features: low inertia has low medium and high speed three models,
suitable for different applications as a standard, 30KW and above
servo motor can be installed flange or bracket.
IP level: IP44.
Application example:
1, injection molding machine.
2, semiconductor manufacturing equipment.
3, large material handling system.
4, stamping machine.
Abundant motor product line can optimize the performance of the
machine.
Has a rich motor product line including a rotary servo motor,
linear servo motor and direct drive motor. Motor series: low
inertia, medium and small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 5.0kw.
Rated speed: 2000rpm.
With a brake band.
Shaft end: straight shaft.
Comparison of single phase induction motor and servo motor.
The working principle of the AC servo motor is similar to that of
the single phase induction motor,
But the rotor resistance of the former is much larger than that of
the latter,
So the servo motor is compared with the single machine asynchronous
motor,
There are three notable features:
1, large starting torque.
2, a wwide range of operation HG-KR13J.
3, no rotation phenomenon.
AC servo motor running smoothly, low noise.
But the control characteristic is non-linear, and because the rotor
resistance is big, the loss is big, the efficiency is low,
Therefore, comparred with the same capacity DC servo motor, the
volume is large and the weight is heavy,
So it is only suitable for 0 HG-KR13J. 5-100W small power control
system. | Servo System Controller | Servo Amplifiers & Motors |
| Motion CPU, independent stand-alone controllers, | Servo amplifier/drives, used in high-precision |
| positioning module products | positioning servo motor control system |
| MELSEC iQ-R series | Servo system controller | MR-J3 series | Servo amplifiers |
| MELSEC-Q series | Multi-CPU precision control | HF-KP series | Servo Motor 200V |
| MELSEC-L series | Motion positioning module | HF-SP series | Servo Motor 400V |
| Electromagnetic clutches and brakes | Tension Controller |
| Supports high-speed, high winding/unfolding | High-speed, high winding process and expand |
| tension, longer material control operations. | operations tension control |
| ZK, ZHA series | Magnetic clutch | LE, LD series | Automatic tension control unit |
| ZKG, ZHY series | Magnetic brake | LM-10,LX-TD series | Tension detector |
| Human Machine Interface (HMI) -GOT | Low-voltage circuit breaker contactor |
| Good compatibility with machine, high performance | MS-N series | Motor starters |
| GOT, productivity and efficiency. | SD-N, S-N series | Electromagnetic contactor |
| GT,GS seriess | GOT HMI | NF,BH-D6,CP series | Low-voltage circuit breaker |
Similer item we can supply:
| HC-UFS13 | HC-UFS23 | HC-UFS73 | HC-UFS43 |
| HC-UFS72 | HC-UFS152 | HC-UFS202 | HC-UFS352 |
| HC-UFS502 | HC-SFS81 | HF-KP13 | HF-SP102B |
| HC-SFS121 | HC-RFS153 | HF-MP13B | HF-SP152B |
| HC-SFS201 | HC-RFS203 | HF-MP23B | HF-SP202B |
| HC-SFS301 | HC-RFS353 | HF-MP43B | HF-SP352B |
| HC-SFS52 | HC-RFS503 | HF-MP73B | HF-SP502B |
| HC-SFS102 | HA-LFS11K2 | HF-KP13B | HF-SP51 |
| HC-SFS152 | HA-LFS15K2 | HF-KP23B | HF-SP702B |
| HC-SFS202 | HA-LFS22K2 | HF-KP43B | HF-SP81 |
| HC-SFS352 | HA-LFS11K2B | HF-KP73B | HF-SP121 |
| HC-SFS502 | HA-LFS15K2B | HF-SP52 | HF-SP201 |
| HC-SFS702 | HA-LFS22K2B | HF-SP102 | HF-SP51B |
| HC-SFS53 | HF-MP053 | HF-SP152 | HF-SP81B |
| HC-SFS103 | HF-MP13 | HF-SP202 | HF-SP121B |
| HC-SFS153 | HF-MP23 | HF-SP352 | HF-SP201B |
| HC-SFS203 | HF-MP43 | HF-SP502 | HC-SFS202K |
| HC-SFS353 | HF-MP73 | HF-SP702 | HC-SFS201B |
| HC-RFS103 | HF-KP053 | HF-SP52B | HC-SFS202B |
Frequently Asked Questions:
1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.We offer one
year warranty for New items,6 months warranty for Used items.
2. Q: Could you provide technology support?
A: We're in this field many year. If there's any problem, please
contact with us,we'll provide suggestion from our engineer to help
you solve problem.
3. Q: Do you keep goods in stock or only trading?
A: We have large warehouse for goods and keeping lots of goods in
warehouse, so we could delivery the items in short lead time.
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Shenzhen Wisdomlong Technology CO.,LTD
Contact person:Suki
Email:wtl2502keji@163.com
Skype:wtl2502
Tel:+86-13268302140
